Hey Again,
I've set up the stand and copper rings. I have these components left but no instructions on how to link to the MWO. I don,t want to break

Thanks,
L------

hi L-----
the Small coil is for grounding
normal its placed 3-5 foot from the rings

TWO OPTIONS
Either join the copper wire to the silver wire supplied and run it outside into the ground or even better into the ground at the base of a tree

OR if that not practical because you live in an apartment block get a pot plant and fill it with sand, place a sand dwelling pot plant in then push your grounding rod into the sand,, put anywhere in your room,,

https://alteredstatesinstructions.com/MWO/index.htm

let me know if i can be of more help

Hello Barry:

Q I have attached pictures of the MWO setup. Do I have it correct?

A hi Looks great
the stands are around the wrong way the T joints should be under your chair
when you turn the stands around the rings will hang properly and not touch the stand also
the main wires from the box to the rings should not be touching the rings, if they touch they will burn through the plastic casing

Questions:

Q Are the patients sitting in two electric fields, each created by one coil, or
is it one field connecting the two coils with each other?

Is the field (s) just treating what is inside it? My knees and feet
are below the coils. Are they not getting exposure? Do I need to
lift them up onto the chair, or is it essential they are grounded to the
piece of wood on the floor?

I saw one picture of a naked women......what is the effect of clothing.

Should the patient have as little clothing as possible?

What is the effect of having the two coils closer than 4 feet? Suppose
it's 2 .5 - 3 feet apart.

I have treated myself for the full time limit 3 times now and do not
feel any different when I am done, or the next day.

Am I doing something wrong? Or does it take more treatments? I have
shoulder and low back pain issues (mild) as well as a motor peripheral
neuropathy in my feet.

Would love to see more overall energy as well.

Thanks

hi R
the way you had it set up you were deadening the rings and shorting out the power flow,,

When you turn the stand around you will see that the rings are now not touching the stand as it bends slightly,Nothing absolutely nothing must touch the rings, or they will not function as designed

the field is up to 20ft from the coils, and the coils act as a sender and receiver, i personally place them aprox 3 ft apart,

Many clients find that naked or just a cotton shift better

if your diet is heavy into animal products,it may take longer to feel the effects,, let me know if the changes, make any difference for you,,

Greetings,

I have interest in purchasing one of your MWO units. I have a miniature version of a MWO that only has one antenna ring. I like your unit and I have an interest in buying one. A question I have, other units I have seen have a transmitter and receiver coil attached to the antennas. Does your unit have the transmitter and receiver coils integrated into the MWO housing unit? I do not see these coils connected to the antenna rings. Please answer when you can.
Regards.
Jose Iglesias
item: https://altered-states.net/barry/Lakhovsky/usingmwohealing.htm

Hello Jose
warm greetings

have a look at this picture https://altered-states.net/barry/bobbeck/mwo4a.jpg
the the set of Antennae on either side of the chair and the black control box sitting on the chair ,, (the chair is not included ) the stand comes as a kit-set takes approx 15-20 mins to assemble,,
more pictures here https://alteredstatesinstructions.com/MWO/pics/indexpic.php

https://altered-states.net/lmwo/lmwo.htm

Hi. I looked at the instructions pdf with pics of base for the antennas. There are two pics. One with pvc pipes where you need a sandbag to stabilize. The other shows the antenna with a thick base in the bottom with possible wheels for antenna support. Which base does the unit come with? I want to purchase your MWO unit but with the best antenna support stands if possible. I look forward to hearing from you. Thank you for all the info in your site.
Regards,
J---e I-----s
item: https://altered-states.net/lmwo/lmwo.htm

Reply by Barry

2021-06-28 16:40:33
hi no sand bag is needed, you pore the sand into the base, this completely stabilises the unit
please look at the pictures in the previous emeil

Mary, 3:59 PM
It wasnt in the instruction clearly so i could understand

Pleaselook at the pdf files here

4:18 PM
hi Please dont touch the two knobs on the side unless the machine starts to miss, like the buzzing sound is not constant,, the units when they first start, start the fan, then when you turn the timer,,(do not wind backwards ever) the spark gap kicks in , its a buzzing sound completely normal

Barry i,m not sure what you mean by the wire that connects to the box,, two wires go from the top of the box to the wing nuts on the rings, there is a grounding (small copper )ring that joins to the steel wire
that attaches to the steel spike
The spike goes in the ground outside or you can use a pot plant filled with sand and put the stake in there

Mary, 4:23 PM
Im sorry I did turn the small knobs I didn't know because there was nothing that something about the knobs on the side I thought that control how much freguency was put out.
4:23 PM
the small copper ring goes close to the big rings but does not touch
why did you turn the knobs ?
how much did you turn ther knobs
?
Mary, 4:25 PM
i attached the wire to the wing nuts but I saw blue tape on one of them so i thought that maybe it should go on the right side or left.
4:26 PM
pleaase just follow the instructions
Mary, 4:30 PM
I did use the planter filled with sand in a room and put the stake in the bottom with the wire attached to it. then I attached the wire to the opposite of the black wire that was attached to the copper the black tape that was zig zag I thought I was not to touch that. I just need to know if there is supposed to be an opening when you put the copper under the chair.
4:34 PM
yes put the copper ring under the chair or anywhere in the room
not more than 10 feet away from the main rings
Mary, 4:35 PM
So where do I turn the small knobs back too.. I turned them to off position. I want to use the MWO on my son tomorrow and I don't want to do anything that would make his condition worst. Help
4:36 PM
Altered States there is no off position on the two small knobs

Altered States, if you start the units and the fan starts and when you put the timer on the spark gap sound starts then hopefully it will not need recalibrating

Mary, 4:53 PM
You still didn't answer the question if I attached the silver wire to the right place on the copper wing.so what is the 2 knobs for? I have placed the copper ring under the chair which is in between the main ring. I thought you told me that the stake had to be at least 10feet away from the main rings
5:01 PM

Altered States The two knobs are for adjusting the spark gap when and only when you have spoken to us and know what your doing

Altered States: You attach the silver wire to the copper wire that is attached to the small copper ring
then the silverwire is attached to the metal peg
the metal peg goes into the ground OR into the potplant with sand in
do you understand ?

Grounding. I live on the 3rd. floor and would need to run a wire 20-25 metres long to a tree in the back garden. Will that work?
Yes you could run the wire its a better option,,or some people run the wire to their electrical plug using the earth pin
its not as good but it will give you an earth..
Does the wire have to be made of steel, and if so, should it be stainless (containing chrome also)? Can it not be a normal copper insulated electrical wire?
Your local hardware store has the wire you need its fine Galvanized steel,,the type the use for tying up steel in concrete,,not much thicker than a midele piano string

My floor has a wool carpet with some sort of (synthetic) rubber backing. Would feet still need to be rested on wood?
No
Position of power unit above the antennae: This would be difficult, but it could sit on the top shelf of a nearby wardrobe with door open during use?
The unit needs to be on a shelf behind the ring,,extending the leads will weaken the output considerably,,is it possible to just lower the wardrobe shelf

The full moon is occurring here in two days' time. How long before and after the full moon do I have to abstain from using the device
Just the night of the full moon

Hello Barry. Thank you for the info you shared with me.
I have some more questions that my wife gave me.
Will the unit we order already be wired to plug in to a US electrical outlet?
Typically how many sessions does it take to feel a difference?
What is the typical shipping time?
Does the MWO come with a warranty?
How long on average does the MWO last?

Also, Does it help increase energy levels?
How long (max time) does each session go?
Does use affect sleep? Meaning, should use in the morning due to being activating?

hi G------
the units come all set up for the voltage and the plugs of your contry
at this time shipping is 45-60 days
the mwo comes with a twelve month faulty workmanship warrantee
My Mwo is still going after 20 years
Most people report an energy level rise
30 mins is the max timer setting
Most people report better sleep, it can be used at any time

can the copper ring be on the left side..more room to be 6 ft away

The copper ring is normally 1-6ft away from the stand

What is the optimal footage from MWO

Spark jobs should they be straight down ..

Sorry i dont unswderstand "SPARK JOBS"
Please do not ajdust the spark gap knobs

Would a towel under box reduce noise ..does the box get hot .

you could try it, no the box does not get hot

Dan got a shock when touching the box ..the plant was near by
And the coil tubing may have been touching the coil.

Make sure the coil tubing is not touching aNYthing

Any tips on moving this for the summer ..Dan will have a truck.
Must Make sure to lay the rings flat do not ever stand them on their edge

I saved the bubble wrap and paper plastic ..should rings be laying flat
Yes

Also how far above the rings does the box have to be..?
There is no set distance

My summer place may not have good shelf ..
if you look here you will see what others have done
https://alteredstatesinstructions.com/MWO/pics/indexpic.php

I will have to get Dan back to re do the wire… its the green one on tthe spool ?
What is the red wire for that is hooked to copper ring ?

if you look here all that is explained
https://alteredstatesinstructions.com/MWO/grounding_earth/indexpdf.php

Thanks for your help! N-----y

4. If I make my own stands would this decrease the purchase and courier costs?
The stands are part of the secure packaging, there are no discounts

5. Do you have a forum showing feedback received for the MWO treatments carried out by purchasers
.
you can visit the testimonial page in this message

6. I note the picture of the clinic in Portugal. They use a very similar couch to mine with a metal frame. Wouldn't a metal frame interfere with the treatment?

yes we warned the client about using these units near metal, but it was ignored