These are the recommended computer printers, available at most computer stores, to run with the Aura Camera 6000. Please call Pacific Computer Supply with your questions or to order: 650-366-0353. Specific company phone numbers are also listed here:

*We tested the following Cannon printers in color, plugged directly into the left hand plate of the Aura Camera 6000. Cannon BJC #1000, BJC #4300, #4400, www.canon.com (650) 366 0353 

*The Cannon BJC#5,000, BJC#6,000, and BJC#4,700 do not work.

*Epson printers will not work either with the Aura Camera 6000.

The printers listed below have been tested in black and white directly plugged into the Aura Camera 6000 hand plate:

*NEC #1260D, NEC #870: www.nec.com (800) 808-3375 

*HP #812C, and the HP #4000N black and white laser printers: www.HP.com (800) 294-4747. 

*We did not test the HP series 600, 700 , or 800 however, our computer expert told us these printers should work too. If you want to use the HP 600, 700, or 800 series printers we suggest you test them first.

*These older printers have also been recommended by Aura Camera 600 0wners in the past, but probably only work in black and white. You may have one lying around:

*Panasonic #2130, #2123, #2135

*HP #500, #393C

*Citizens GSX #190

*Most older impact, IBM compatible dot matrix printers with parallel ports will work great. You can find these by the loads at garage sales and thrift stores for about $20.

*Please send us the name and model number of any printer you are using and like. This information will help other Aura Camera Owners. 

*If you are in doubt about which printer that will work, take your Aura Camera left hand sensor plate and power supply to your local computer shop and test printers. Just plug the hand plate into the printer, the power supply into the power source, and push the little black "mode" button one time and see if it prints the status report. If it prints the one page status report nicely, then the printer should work.